SWT-121 ( MULTIPURPOSE WATER TREATMENT CHEMICAL )

SWT - 121 is an advanced synthetic liquid formulation designed to control scale, corrosion and inorganic fouling in open recirculating water system. SWT - 121 is also specially designed to prevent deposits by calcium, magnesium, and silica. SWT -121 minimises fouling problems by dispersive saturation of water soluble minerals. SWT – 121 helps to clean the metallic oxide deposits maintaining the heat transfer surface.

USE

SWT - 121 is mainly used in DG set, open cooling system, heat exchanger and its jacket cooling system, AC plant cooling system, Laminate plants, Oil Mills cooling system, Air compressor cooling system, Distillation plant cooling System etc. The product SWT - 121 is synthetic organic antifoulant in habiting the deposition of fouling materials. It is an organophoshate with multi functional properties like sequestration and defloculation and inhabition.

( Sequestration is a complex formation by certain phosphate with metallic ions in solution. )

DOSAGE

SWT - 121 dosage will vary with water quality and different parameters of cooling system. Exact treatment programme can be suggested after studying them.

HANDLING

SWT - 121 must be handled with care. Contact with skin should be avoided. If contact with eyes, flush with water and get prompt medical treatment.

SWT - 24 cooling water treatment is a corrosion inhibitor for protecting, recirculationing, cooling and heating water system. SWT - 24 is also useful for chilling plant corrosion inhibitor.

FEATURES

• Effective corrosion inhibitor
• Scale inhibitor

APPLICATIONS

SWT - 24 is an effective corrosion inhibitor for all ferrous and non ferrous metal. If the cooling system is found to be contaminated, with spal it must be chemically cleaned before treatment.

BENEFIT

• Project ferrous and non ferrous metal.
• Minimize metal oxide depositions.
• Maintain the heat transfer efficiency.
• Reduce cleaning
• Ready to use liquid.
• Easy to handle and feed.
• Compatible with other treatment chemicals.

STORAGE AND HANDLING

Keep the container closed when not in use. Product should not be swallowed and prolonged contact with skin should it contact with eyes, flush with clean cold water and get prompt medical attention. In accordance with good safely practice, use gloves and goggles while handling the product.

DOSAGE

Dosage of SWT - 24 varies with boiler corrosion rate.

PACKING

PRODUCT DATA

SWT - 88

SWT - 99

Form

LQUID

LQUID

Specific gravity at 25° C

1.05-11

1.1-1.15

Appearance

BROWN LIQUID

BROWN LIQUID

Flash point

None

None

ADVANTAGES

• Broad – spectrum action
• Ready to use liquid
• Non corrosive metals
• Effective at low dosage
• Keep tower basin clean

DOSAGE

Generally SWT - 88 and SST- 99 are to be dosage alternate basis every week at the concentration of 50 ppm on the basis of total holding capacity of cooling tower basin.

HANDLING

Keep the container closed when not in use. The product should not be contact with skin, eyes and if it comes then clean with cold water and get medical attention immediately.

CONCLUSION

For cooling tower circuit total water volume of the basin will be changed by fresh water within week time.

• We claim for 100% Carbonate scale free water circuit.
• We claim for 100% oxidation corrosion from water circuit.
• We claim for 65% micro bio fungus free water circuit.

SWT - 47 ( CLOSE WATER CORROSION INHIBITOR )

SWT – 47 is a liquid polymerize compound with organic corrosion inhibitor for scale, corrosion and cavitation control in closed recirculation cooling water system. SWT -47 is easily soluble in water. The product is from chromate.

DIRECTION FOR USE

SWT - 47 liquid is a highly effective corrosion inhibitor for all the common ferrous and non-ferrous metal in cooling water system using distilled water, DM water RO water or raw water.

SWT - 47 will protect ferrous metal, copper & copper alloys & some components of aluminum.

SWT - 47 is compatible with glycol base solution.

SWT - 47 has been field tasted and found to have no detrimental effect on non metallic substance such as a oil seal, hoses, gland, gasket used in these system.

The product is alkaline which is reduce corrosion effect in cooling system due to higher temperature.

If the system is contaminated with scaling or oil, please descale the system with scale clean & flushed with water.

ADVANTAGES

• Project the common metal in cooling from corrosion attack.
• No chromate product.
• Highly effective against cavitations erosion.
• Compatible with permanent type of anti frees product.
• Ready to use liquid product.
• Easy to handle and feed.
• Control scale formation an sludge formation.

APPLICATION

• Diesel engines cooling system.
• Close water cooling system.
• Air compressor cooling system.
• Chilling plant.
• Hot water heating system.
• Appearance Red liquid.
• PH above 10.00.
• Density 1.5 (+ or – 0.5)

DOSAGE

As per quotation.

STORAGE & HANDLING

Keep the container closed when not in use harmful oxidizing substance if allowed. Irritating to eyes & skin repeated exposure may cause chronic eyes irritation defecting drying and cracking of skin. In accordance with good safety practice use gloves and goggles while handling the product. Store the container in full dry place.

PACKING

SWT- 47 is available in 10 kgs, 35 kgs & 50 kgs carboy packing.